ORDER TODAY for FREE SHIPPING! (lower 48 states)

A10 power tool soft starter life saver

A10 (15A max.)

Regular price
$29.99
Sale price
$29.99

FREE SHIPPING! (lower 48 states)
Quantity must be 1 or more

 

Recommended for lower duty cycle applications with 10-15Amp, 120VAC Motors.

Rugged and durable construction.

14AWG conducting wires.

Silicone rubber end caps.

Grounded aluminum body for safety and short-circuit protection.

Built in the U.S.A.!

 

SPECIFICATIONS:

Voltage:110-120 Volts AC

Maximum steady state current: 15A

Ambient operating temperature: 32° - 110°F

Maximum product external temperature: 204°F

Maximum (Full Inrush Suppression) Duty Cycle: 7 Starts per Hour (room temperature with no auxiliary cooling fan)

 

WARNING:

This product can reach temperatures exceeding 200ºF.

     1. Do not touch the aluminum body of the Soft-Starter

     2. Keep out of reach of children and pets.

     3. Keep this product away from heat sensitive objects.

     4. Do not use a power splitter of any kind.

 

INSTRUCTIONS:

     1. Plug the Soft-Starter into the power receptacle.

     2. Plug your appliance into the Soft-Starter.

     3. Make sure the Soft-Starter is at least 12 inches away from heat sensitive objects.

     4. Indoor use only.

 

RAMP TIMES:

Ramp time is the length of time required for the motor to go from OFF to full speed. Ramp times will vary based on conditions such as: ambient temperatures, equipment construction, and the state of recovery from the previous use.

 

Approximate ramp time @ 32°F:  2.5s

Approximate ramp time @ 70°F:  1.6s

 

RECOVERY TIMES:

The recovery time is the amount of time required for the Soft-Starter to return to its normal state after use. Full recovery times can vary from 30 seconds to 40 minutes depending on:  applied load, duration of applied load, ambient temperature, air movement around the Soft-Starter, etc. A fan blowing on the soft starter will significantly speed up recovery times. 

                    

DIMENSIONS:

Overall Length: 16.5 inches
Overall Width: 2 inches

Weight: 13.4 ounces

 

Miter saw plugged into A10 soft starter

 

 

Customer Reviews

Based on 12 reviews
92%
(11)
0%
(0)
0%
(0)
0%
(0)
8%
(1)
T
T.K.

have not used it yet but the product looks great...very well built
I read the heat precautions of over usage
have a 1945 home w/ 20amp glass fuse circuits...this will help the load
> TK

R
R.B.
A10

Outstanding product! It tamed my jump start miter saw into a soft start miter. Thank you,

a
a.l.
Great staff

I was need it long time ago. This device working very good. Grinding disk now I can start safety one hand. Necessary staff in every working place

C
C.
Fixed my cheap 10" Craftsman from sounding like a bomb going off

It now purrs like a kitten when you start it up. These cheap table saws are lacking everything these days. This was a super simple and affordable solution.

R
R.M.

Too risky for other people’s not having clear understanding and dangerous around wood shops that might cause fires. And part isn’t refundable..I’m just not happy.. for my own research I ask few woodworkers on if they knew if their table saw, drill press, planers or the likes if they had brushes, what I found most said ‘oh I have no idea’.... so it’s risky

Hi Ralph, I'm sorry that you are not happy with our product. We try to make it VERY clear how to properly identify your power tool motor as compatible or not, and we highly recommend that you contact us beforehand if you are not confident in doing so. Unfortunately, we are unable to offer a refund for products that are damaged as a result of misuse or operator error.